Vaporizer (Canada) Heilyser JB 200

$125.00

High speed electric oxalic acid vaporizer.  Wires and measuring spoon included.

All Vaporizers coming with an measurable for the crystals and safety instructions – how to start- oxalic acid application.

JB200 high-speed Oxalic Acid Vaporizer is a 1 minute vaporizer, the fastest Vaporizer available and was developed for beekeepers who care for large numbers of hives.  With this system, it is possible to connect several Vaporizer “in line” to treat more than one colony at the time.    Treating 4 colonies in one minute is no problem.

This high-speed vaporizer comes with a “free standing acid tray” and a heat protector to prevent scorching. The acid tray has no contact with the bottom in your hive and evaporation of the acid starts in approximately 15 seconds.

It is powered by a 12-Volt car battery.

This high-speed electric vaporizer can be applied 12 months of the year as long as the temperature are 3-5 degrees above freezing point.

*Made in Canada

The JB 200 high-speed vaporizer comes with a “free standing acid tray” and a heat protector to prevent scorching. The acid tray has no contact with the bottom in your hive and evaporation of the acid starts in approximately 15 seconds.

The acid tray of any vaporizer should  NOT TOUCH  the screen or wood bottom of the hive. Any vaporizer must have a means of fire protection for the hive. If there is no means of fire protection , the acid tray heats up the metal screen and the acid evaporates too slowly. 
Moreover, every wooden hive bottom contains wax and other debris, which can easily catch fire. Vaporizers without “free standing acid  trays” works like a branding irons; they are not suitable tools for eliminating Varroa mites.  

The JB 200 high-speed is powered by a 12-Volt car battery. With this system, it is possible to connect several vaporizers ” in line ” to treat more than one colony at the time.  Click here to see how to connect several JB200 Electric Vaporizers “in line”An entrance clearance of 1/2 inch or 12 mm is required.  

After application remove the JB200 and seal the hive for at least 10 minutes using a foam strip.
The treatment with JB200 high-speed electric vaporizer can be applied 12 months of the year as long as the temperature are 3-5 degrees above freezing point.